FUJI D6 SIX STAGE TURBINE PAINT SPRAYER

✅ Ideal For:

• Cabinet finishing and kitchen refinishing
• Furniture and high-end woodworking
• Millwork, trim, and built-ins
• Professional painters and finishing contractors
• Shops spraying waterborne and solvent-based coatings daily
• Users needing maximum turbine power for thicker materials

💙 Why Finishers Love It:

• 🔥 6-Stage Turbine Power (11.5 PSI / 0.79 bar)
  Fuji’s most powerful turbine — designed to spray heavier coatings with proper atomization
• 🎯 6-Level Variable Speed Control
  Adjust airflow precisely to match coating viscosity and job size
• 🚫 Handles High-Viscosity Coatings
  Built to spray latex, primers, and high-build finishes with significantly less thinning
• 💨 Advanced HVLP Atomization
  Produces a smooth, even spray pattern with reduced overspray vs. conventional systems
• 🌡 Warm, Dry Turbine Air
  Minimizes moisture contamination and improves finish consistency
• 🛠 Professional-Grade Construction
  Metal turbine case with bypass cooling system for extended run times and durability

🎨 Finish Options:

(Determined by spray gun and air cap setup)

Compatible with:

• Waterborne coatings
• Solvent-based lacquers
• Pre-cat & post-cat systems
• Conversion varnish
• Polyurethane (1K & 2K)
• Primers, sealers, and latex paints

🧪 Product Specs:

• System Type: HVLP Turbine Sprayer (self-contained)
• Turbine Motor: 6-stage bypass motor
• Max Pressure Output:
  • 11.5 PSI (0.79 bar)
• Speed Control: 6-stage variable dial
• Technology: High Volume Low Pressure (HVLP)

Performance:

• Designed for thin to high-viscosity coatings
• Supports reduced or no thinning depending on material
• Delivers fine atomization and consistent coverage
• Improves transfer efficiency and reduces material waste

🛠 Spray Equipment Guide:

• System Type: Turbine HVLP (no compressor required)
• Max Operating Pressure:
  • 11.5 PSI (0.79 bar)

Compatible Spray Guns:

• Fuji T70 – Bottom feed (larger fluid capacity)
• Fuji T75G – Gravity feed (better control, most popular)
• Fuji G-XPC – Pressure feed compatible

Typical Setup:

• Hose Length: 30 ft (9.1 m)
• Air Cap / Tip Recommendations:
  • 1.3 – 1.5 mm: stains, sealers, clears
  • 1.5 – 1.8 mm: lacquers, conversion varnish, urethane
  • 1.8 – 2.0 mm+: primers, latex paints

🌡 Handling & Storage:

• Cooling System: Bypass cooling system for extended turbine life
• Duty Rating: Designed for continuous professional use
• Storage Conditions:
  • Store in a dry, dust-free environment
  • Avoid extreme heat or freezing temperatures
• Construction: Heavy-duty metal turbine housing

📦 What’s Included:

(Varies by selected option — set as product variations)

• Fuji D6 6-stage turbine unit
• 30 ft (9.1 m) HVLP hose
• Air cap set (pre-installed)
• User manual